Well progress continues, over the last month I have mamneged to order and fit the oil cooler pipes and finish of the water pipes to the radiator, block, heater etc. Using as much of the 101 as possible, and lengths of new hose when required.
Had orginally made a a braket to hold the geat leaver but when testing I foun that this flex'd so much that I couldn;t select gears. so back to the drawing baord.
Tonight out of 10mm plate I made up a complete bracket to hold the 101 Orignal braket in approximately the right position to ( with a test fit) fit the engine cover.
Spent a couple more hours welding and "beefing" up the new bracket ...
Photo to follow.
