:D  Joy

Boxing day,  weather broke up here and I managed about 4 hours outside,  finally decided that it was about time tiny was taken for a test drive with new engine,   so tidied out the load bay and gingerly fired up the engine  check the clutch for the nth time and selected first LOW,   and she pullup up out of the drive and into the tuning space,  managed a 3 point turn but, reverse was difficult.

3 ( well 10) point turn done it was off down the drive,  in HIGH,  1st 2nd 3rd  but no fourth, just no space....   back up  the drive and park,  again struggling to get reverse.

Looking at the selector on the gear box there is a small assembly on the right of the leaver this is the detent pin for reverse,   by cleaning this up and shortening the spring I managed to get the reverse to be selectable "easily" well easier....



Today,
     Started modifying the rear floor to allow it to fit as the gear box fouls at the selector and on the remote.

Also need to start taking photo;s again...